|
Xaxero Products
NavCom Digital (the US
Distributor of Xaxero products) can provide provide activation codes for Xaxero products. Please just call
NavCom Digital's support number (281.334.1174) or
e-mail them with the
customer name, dealer where the product was purchased, product key (for PTC and
Sound Card editions of WeatherFax 2000), and the serial
number generated in the customer's computer when the program is installed (not
required for WindPlot). They will be glad to e-mail or call the customer and
/or the dealer with the activation code.
Support for all Xaxero Products:
Xaxero Support Web Site -- please check here before contacting us for support
WeatherFax Tips:
When using WeatherFax 2000 (USB or RS-232
Demodulator versions) with an Icom M802 SSB Transceiver, plug the demodulator
into the external speaker jack, not the headphone jack, for good reception.
Looking for The World of Weatherfax
and can't find it on your computer -- it now runs from the program CD
itself. Insert your WeatherFax program CD, go to WindPlot and Extras,
and from there install the World of WeatherFax.
CAPN
CAPN Help Page
Telephone: 281.334.3320 (NavCom
Digital is currently providing tech support for all CAPN customers)
Email: Email Us
Activations: Please email your serial
number, product code, name and address.
The magnetic variation file MUST be updated, even if doing a new
installation. Failure to update this file will result in many
different kinds of errors and problems in the CAPN.
Magnetic Variation Update File: wmm.dat
Save the new WMM.dat file over the old WMM.dat file.
This file is located in the folder where your copy of The CAPN is
installed.
By default The CAPN is installed at "C:\Capn Voyager\" and you should be
able to save the file here.
Be sure to click to overwrite the existing file.
Iridium
Iridium 9505a User's Manual (.pdf file)
6MB
Iridium
9555 User's Manual (.pdf file)
Iridium 9555 Windows
Drivers (XP, Vista, Windows 7)
Iridium Support FAQs
Pactor Modems
Check Here to
Determine
the Proper Cables for Your Radio
Downloads
Current XGate Setup Software
Current XGate
DUN Software
Current FTDI Chip Drivers for USB Adapter with
V Marking on Connector -
Instructions for Installation of FTDI Chip Drivers
Drivers for Sabrent
(Prolific)
USB to Serial Adapter -- Windows (32 & 64 bit)
Current
Edgeport/1 USB to Serial Converter Drivers
Diagram for SeaTech Communicator
Package Installation
Vista Drivers for Engenius 362-EXT USB WiFi Adapter
Windows 7 Drivers
for Engenius 362-EXT USB WiFi Adapter (manual installation required)
BU-353
GlobalSat USB GPS Drivers for Windows 7/XP/Vista (32 & 64-bit)
Magnetic Variation Update File for CAPN software: wmm.dat
Save the new WMM.dat file over the old WMM.dat file.
This file is located in the folder where your copy of The CAPN is
installed.
By default The CAPN is installed at "C:\Capn Voyager\" and you should be
able to save the file here.
Be sure to click to overwrite the existing file.
Globalstar
Globalstar User's Manual
(.pdf file) 4MB
Voicemail User Guide (.pdf file)
SPOT
SPOT User Guide
| 
